Freeman 26 MK2
The Freeman 26 Mk2 is a slight modification of the original design, the hull was changed, the prow not being quite so high as the original boat. In 1970 the windscreens were changed from chrome brass to alluminium and a few of the deck fittings were also modernised.
This is a factory specification from the original boat brochures. It must be noted that each boat was individually made, sometimes to owners particular specifications and the manufacturing process developed over time.
|Length: || ||25' 10"|| ||Beam: || ||8' 10"|
|Draft: || ||2' 6"|| ||Height Above Waterline: || ||7' 4"|
|Headroom: || ||6'|| ||Speed: || ||8 - 9 Knots|
|Construction: || ||Fibreglass|| ||Berths: || ||4|
|Water Capacity: || ||From 15 Gallons|| ||Fuel Capacity: || ||From 15 Gallons|
|Start Date: || ||1968|| ||End Date: || ||1972|
The boats were fitted with a number of engine options from new.
This model could of been fitted with one of the following engines depending on the original order.
Watermota Sea Tiger Crossflow, Perkins 4.107, Perkins 4.108
Further information on the engines and the models they were fitted in can be found in the engines section.